Orange PI Zero

Orange PI Zero

출처 : 스터디메이크 :: 오렌지파이 제로 보드 간단 사용기
Xunlong Orange Pi Zero

OS 설치

OS 다운로드 - Orange Pi Zero – armbian

vi 설치

$ sudo apt-get install vim

Orange PI Zero 와이파이 설정

출처 : 오렌지파이 제로 무선인터넷 설정 1.2 암비안 와이파이 설정

$ sudo nmtui

SD 확장

SD 확장전 용량확인

$ df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/root       1.6G  1.2G  349M  78% /
devtmpfs        168M     0  168M   0% /dev
tmpfs           224M     0  224M   0% /dev/shm
tmpfs           224M  8.5M  216M   4% /run
tmpfs           5.0M  4.0K  5.0M   1% /run/lock
tmpfs           224M     0  224M   0% /sys/fs/cgroup
tmpfs           224M  4.0K  224M   1% /tmp
/dev/mmcblk0p1   63M  4.6M   59M   8% /media/boot
tmpfs            45M     0   45M   0% /run/user/107
tmpfs            45M     0   45M   0% /run/user/1000

SD FDisk

orangepi@OrangePizero:~$ sudo fdisk /dev/mmcblk0

Welcome to fdisk (util-linux 2.25.2).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.


Command (m for help): p
Disk /dev/mmcblk0: 7.4 GiB, 7948206080 bytes, 15523840 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x000b04ea

Device         Boot  Start     End Sectors  Size Id Type
/dev/mmcblk0p1       40960  172031  131072   64M  b W95 FAT32
/dev/mmcblk0p2      172032 3514367 3342336  1.6G 83 Linux


Command (m for help): d
Partition number (1,2, default 2): 2

Partition 2 has been deleted.

Command (m for help): n
Partition type
   p   primary (1 primary, 0 extended, 3 free)
   e   extended (container for logical partitions)
Select (default p): p
Partition number (2-4, default 2): 2
First sector (2048-15523839, default 2048): 172032
Last sector, +sectors or +size{K,M,G,T,P} (172032-15523839, default 15523839): 

Created a new partition 2 of type 'Linux' and of size 7.3 GiB.

Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Re-reading the partition table failed.: Device or resource busy

The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8).

orangepi@OrangePizero:~$ sudo shutdown -r now

SD 확장

$ sudo resize2fs /dev/mmcblk0p2
resize2fs 1.42.12 (29-Aug-2014)
Filesystem at /dev/mmcblk0p2 is mounted on /; on-line resizing required
old_desc_blocks = 1, new_desc_blocks = 1
The filesystem on /dev/mmcblk0p2 is now 1918976 (4k) blocks long.

SD 확장 확인

$ df -h
Filesystem      Size  Used Avail Use% Mounted on
/dev/root       7.3G  1.2G  5.8G  17% /
devtmpfs        168M     0  168M   0% /dev
tmpfs           224M     0  224M   0% /dev/shm
tmpfs           224M  8.5M  216M   4% /run
tmpfs           5.0M  4.0K  5.0M   1% /run/lock
tmpfs           224M     0  224M   0% /sys/fs/cgroup
tmpfs           224M  4.0K  224M   1% /tmp
/dev/mmcblk0p1   63M  4.6M   59M   8% /media/boot
tmpfs            45M     0   45M   0% /run/user/107
tmpfs            45M     0   45M   0% /run/user/1000

vnc 설치

출처 : Armbian: Access the Remote Desktop of Orange Pi with VNC

vnc 설치

$ sudo apt-get update && apt-get upgrade
$ sudo apt-get install tightvncserver

vnc 사용자 추가

$ su - 
# adduser vnc
Adding user `vnc' ...
Adding new group `vnc' (1001) ...
Adding new user `vnc' (1001) with group `vnc' ...
Creating home directory `/home/vnc' ...
Copying files from `/etc/skel' ...
Enter new UNIX password: 
Retype new UNIX password: 
passwd: password updated successfully
Changing the user information for vnc
Enter the new value, or press ENTER for the default
        Full Name []: VNCuser
        Room Number []: 
        Work Phone []: 
        Home Phone []: 
        Other []: 
Is the information correct? [Y/n] 

vnc 사용자 추가

# gpasswd -a vnc sudo
Adding user vnc to group sudo

vnc 서버 실행

# su - vnc
$ vncserver :1
 
You will require a password to access your desktops.
 
Password: 
Verify:   
Would you like to enter a view-only password (y/n)? 
*** buffer overflow detected ***: vncpasswd terminated
xauth:  file /home/vnc/.Xauthority does not exist
 
New 'X' desktop is OrangePizero:1
 
Creating default startup script /home/vnc/.vnc/xstartup
Starting applications specified in /home/vnc/.vnc/xstartup
Log file is /home/vnc/.vnc/OrangePizero:1.log

JDK 설치

$ sudo apt install -t jessie-backports openjdk-8-jre openjdk-8-jre-headless openjdk-8-jdk openjdk-8-jdk-headless ca-certificates-java

JAVA_HOME 환경변수 추가

$ sudo vi /etc/profile

내용 추가 export JAVA_HOME=/usr/lib/jvm/java-8-openjdk-armhf

export JAVA_HOME=/usr/lib/jvm/java-8-openjdk-armhf