Orange PI PC2 Camera(GC2035), motion

Orange PI PC2 Camera(GC2035), motion

출처 : How to Use Orange Pi Camera in Linux (with Motion)

Camera 모듈 설치

X

user@localhost:~

[user@localhost]$ sudo vi /etc/modules

내용 추가

gc2035
vfe_v4l2

Camera 설치 확인

X

user@localhost:~

[user@localhost]$ dmesg | grep gc2035
[   11.157004] [VFE]Find sensor name is "gc2035", i2c address is 78, type is "YUV" !
[   11.157006] [VFE]Sub device register "gc2035" i2c_addr = 0x78 start!
[   11.701914] [VFE]Sub device register "gc2035" is OK!
[user@localhost]$ ls /dev/video*
/dev/video0

Camera 정보

X

user@localhost:~

[user@localhost]$ modinfo gc2035
filename:       /lib/modules/3.10.65/kernel/drivers/media/platform/sunxi-vfe/device/gc2035.ko
license:        GPL
description:    A low-level driver for GalaxyCore gc2035 sensors
author:         raymonxiu
srcversion:     3B1ED5B0A55C98A6E316274
alias:          i2c:gc2035
depends:        vfe_io
intree:         Y
vermagic:       3.10.65 SMP preempt mod_unload modversions aarch64

motion

출처 : How to Use Orange Pi Camera in Linux (with Motion)

X

user@localhost:~

[user@localhost]$ sudo apt-get install motion
[user@localhost]$ sudo motion
[4743584] [NTC] [ALL] conf_load: Processing thread 0 - config file /etc/motion/motion.conf
[4743584] [NTC] [ALL] motion_startup: Motion 3.2.12+git20140228 Started with SDL support
[4743584] [NTC] [ALL] motion_startup: Logging to file (/var/log/motion/motion.log)

motion deamon 실행 수정

X

user@localhost:~

[user@localhost]$ sudo vi /etc/default/motion

내용 수정

# set to 'yes' to enable the motion daemon
start_motion_daemon=no