티스토리 뷰

OS/Tinker Board

Tinker Board : 개봉기, OS 설치

파란크리스마스 2018. 8. 18. 17:06
728x90

출처

개봉기

스펙

ModelTinker BoardTinker Board S
Release DateApril 2017January 2018
SoCRockchip RK3288
ArchitectureARMv7-A(32-bit)
CPUQuad core 1.8 GHz ARM Cortex-A17 (up to 2.6GHZ turbo clock speed) (32-bit)
GPU600 MHz Mali-T760 MP4 GPU
RAM2GB dual channel LPDDR3
Storageremovable MicroSD slot ( supporting SD 3.0 )16GB eMMC + removable MicroSD slot ( supporting SD 3.0 )
Video outputfull size HDMI 1.4, MIPI-DSI (compatible with the Raspberry Pi 7" display and others)full size HDMI 1.4 (CEC support added), MIPI-DSI(compatible with the Raspberry Pi 7" display and others)
Video inputMIPI-CSI camera
AudioRTL ALC4040 HD CODEC, Play: 24bit/192kHz, Record: 24bit/96kHz

3.5 mm audio jack ( supporting line out and microphone in )

RTL ALC4040 HD CODEC, Play: 24bit/192kHz, Record: 24bit/96kHz

3.5 mm audio jack ( supporting line out and microphone in, Plug-in Detection and Auto-Switch )

Other IO40-pin header with:
  • up to 28 x GPIO pins
  • up to 2 x SPI bus
  • up to 2 x I2C bus
  • up to 4 x UART
  • up to 2 x PWM
  • up to 1 x PCM/I2S
  • 2 x 5V power pins
  • 2 x 3.3V power pins
  • 8 x ground pins

1 x 2-pin contact pin :

  • 1 x PWM
  • 1 x S/PDIF
40-pin header with:
  • up to 28 x GPIO pins
  • up to 2 x SPI bus
  • up to 2 x I2C bus
  • up to 4 x UART
  • up to 2 x PWM
  • up to 1 x PCM/I2S (Enhanced I2S pin with Slave mode)
  • 2 x 5V power pins
  • 2 x 3.3V power pins
  • 8 x ground pins

1 x 2-pin contact pin :

  • 1 x PWM
  • 1 x S/PDIF

1 x 2-pin Power-on Header

USB4 x USB 2.0 ports
NetworkingGigabit LAN ( not shared with USB bus )
WirelessBluetooth V4.0 + EDR, 802.11 b/g/n Wi-Fi, with IPEX antenna header
PowerMicro-USB; due to Micro-USB power delivery limitations, powering over GPIO is suggested [2][3]
Form Factor3.37 inch x 2.125 inch ( 8.55 cm x 5.4 cm )
Weight55g
Operating SystemsTinkerOS is a Debian Linux derivative & Android 6

OS 이미지 SD메모리에 복사

SD 메모리로 부팅

제가 구입한 Tinker Board S의 경우 eMMC에 안드로이드 OS가 설치되어 있어 리눅스 OS 이미지가 복사된 SD 메모리를 삽입하고, 부팅해도 안드로이드로 부팅이 되는데, 아래 이미지 처럼 Maskrom mode로 설정후 부팅하면 SD메모리에 설치된 OS로 부팅이 됩니다.

라즈베리파이 7인치 모니터 적용 (MIPI-DSI)

댓글
300x250
공지사항
최근에 올라온 글
최근에 달린 댓글
Total
Today
Yesterday
«   2024/03   »
1 2
3 4 5 6 7 8 9
10 11 12 13 14 15 16
17 18 19 20 21 22 23
24 25 26 27 28 29 30
31
글 보관함