BPI-M2 ZERO

OS/Banana Pi /BPI-Bit 2017.12.23 02:17 Posted by 파란크리스마스

BPI-M2 ZERO

출처 : BPI-M2+/BPI-M2+(H2)/BPI-M2+(H5)/BPI-M2 ZERO - Banana Pi

OS 설치

출처 : BPI-M2+/BPI-M2+(H2)/BPI-M2+(H5)/BPI-M2 ZERO Image - Banana Pi

SD 확장

SD 확장전 용량확인

$ df -h
Filesystem      Size  Used Avail Use% Mounted on
udev            181M     0  181M   0% /dev
tmpfs            50M  3.5M   46M   8% /run
/dev/mmcblk0p2  6.7G  4.9G  1.6G  77% /
tmpfs           248M  384K  248M   1% /dev/shm
tmpfs           5.0M  4.0K  5.0M   1% /run/lock
tmpfs           248M     0  248M   0% /sys/fs/cgroup
tmpfs            50M   20K   50M   1% /run/user/1000
/dev/mmcblk0p1  256M  9.7M  247M   4% /media/pi/BPI-BOOT

SD FDisk

pi@bpi-iot-ros-ai:~$ sudo fdisk /dev/mmcblk0
 
Welcome to fdisk (util-linux 2.27.1).
Changes will remain in memory only, until you decide to write them.
Be careful before using the write command.
 
 
Command (m for help): p
Disk /dev/mmcblk0: 14.9 GiB, 15931539456 bytes, 31116288 sectors
Units: sectors of 1 * 512 = 512 bytes
Sector size (logical/physical): 512 bytes / 512 bytes
I/O size (minimum/optimal): 512 bytes / 512 bytes
Disklabel type: dos
Disk identifier: 0x3b7f8abe
 
Device         Boot  Start      End  Sectors  Size Id Type
/dev/mmcblk0p1      204800   729087   524288  256M  c W95 FAT32 (LBA)
/dev/mmcblk0p2      729088 14940159 14211072  6.8G 83 Linux
 
Command (m for help): d
Partition number (1,2, default 2): 2
 
Partition 2 has been deleted.
 
Command (m for help): n
Partition type
   p   primary (1 primary, 0 extended, 3 free)
   e   extended (container for logical partitions)
Select (default p): p
Partition number (2-4, default 2): 2
First sector (2048-31116287, default 2048): 729088
Last sector, +sectors or +size{K,M,G,T,P} (729088-31116287, default 31116287): 
 
Created a new partition 2 of type 'Linux' and of size 14.5 GiB.
 
Command (m for help): w
The partition table has been altered.
Calling ioctl() to re-read partition table.
Re-reading the partition table failed.: Device or resource busy
 
The kernel still uses the old table. The new table will be used at the next reboot or after you run partprobe(8) or kpartx(8).
 
pi@bpi-iot-ros-ai:~$ sudo shutdown -r now

SD 확장

$ sudo resize2fs /dev/mmcblk0p2
resize2fs 1.42.13 (17-May-2015)
Filesystem at /dev/mmcblk0p2 is mounted on /; on-line resizing required
old_desc_blocks = 1, new_desc_blocks = 1
The filesystem on /dev/mmcblk0p2 is now 3798400 (4k) blocks long.

SD 확장 확인

$ df -h
Filesystem      Size  Used Avail Use% Mounted on
udev            181M     0  181M   0% /dev
tmpfs            50M  2.3M   48M   5% /run
/dev/mmcblk0p2   15G  4.9G  8.9G  36% /
tmpfs           248M  220K  248M   1% /dev/shm
tmpfs           5.0M  4.0K  5.0M   1% /run/lock
tmpfs           248M     0  248M   0% /sys/fs/cgroup
tmpfs            50M   24K   50M   1% /run/user/1000
/dev/mmcblk0p1  256M  9.7M  247M   4% /media/pi/BPI-BOOT

RDP(원격데스크탑) 설치

출처 : How to use RDP - BananaPro/Pi - LeMaker wiki

RDP(원격데스크탑) 설치

$ sudo apt-get install xrdp
$ sudo apt-get install tightvncserver

RDP 서비스로 등록

$ sudo systemctl enable xrdp
xrdp.service is not a native service, redirecting to systemd-sysv-install
Executing /lib/systemd/systemd-sysv-install enable xrdp
insserv: script firstrun.bpi: service firstrun already provided!
insserv: script firstrun.bpi: service firstrun already provided!

재부팅

$ sudo reboot

원격데스크탑 접속

JDK 설치

출처 : Install Java 8 on Armbian (Orange Pi Lite or higher) • DIY Projects

저장소 추가

$ sudo add-apt-repository ppa:webupd8team/java

추가한 저장소 반영

$ sudo apt-get update

JDK 설치

$ sudo apt-get install oracle-java8-installer

JAVA_HOME 환경변수 추가

$ sudo vi /etc/profile

내용 추가 export JAVA_HOME=/usr/lib/jvm/java-8-oracle

export JAVA_HOME=/usr/lib/jvm/java-8-oracle

JDK 설치 확인

$ $JAVA_HOME/bin/java -version
java version "1.8.0_151"
Java(TM) SE Runtime Environment (build 1.8.0_151-b12)
Java HotSpot(TM) Client VM (build 25.151-b12, mixed mode)


 

티스토리 툴바